AMGO Heavy-Duty 12,000 lb 2-Post Lift | OH-12S

Name: AMGO Heavy-Duty 12,000 lb 2-Post Lift | OH-12S
Brand: AMGO
SKU: OH-12S
Price: 4395.00 USD
Availability: InStock

★★★★★ 4.8 (127 reviews)

Capacity 9,000 LB

Configuration Symmetric

Max Height 72"

Power 220V

$4395.00 $6450.00

In Stock

Qty:

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU	OH-12S
Brand	AMGO
Category	2-Post Lift
Lift Capacity	9,000 lbs
Configuration	Symmetric
Maximum Lifting Height	72 inches
Minimum Ceiling Height	11 feet
Overall Width	140 inches
Overall Height	140 inches
Front Arm Design	3-stage telescoping with rubber pad adapters
Rear Arm Design	2-stage telescoping with rubber pad adapters
Power Requirements	220V, 60Hz, single-phase
Motor Power	2.2 HP
Safety Features	Single-point safety lock release, overhead safety shut-off bar
Lifting Time	50 seconds (floor to full height)
Certifications	ALI/ETL Certified
Warranty	1-year parts, lifetime structural
Shipping Weight	1,180 lbs
Country of Origin	China (manufactured to North American standards)

AMGO 12,000 lb 2-Post Lift - Adjustable Height | OH-12S

Buying a 2 Post Lift can feel risky when you are worried about ceiling height, door swing, and whether the arms will actually reach your lift points. If you run a busy shop, you also need predictable safety locks, real under-car clearance for trucks and vans, and a clear floor to keep jacks and creepers moving. The AMGO OH-12S answers those pain points with a 12,000 lb capacity, dual direct-drive hydraulics, and an overhead limit bar that protects taller vehicles. With three selectable overall heights to fit 12–14 ft ceilings, it drops into more buildings without costly modifications. If you are searching for a dependable 2 Post Lift, this model is a smart, future-proof pick for commercial bays.

This OH-12S gives you room to breathe under the vehicle without stretching your building limits. Choose overall heights of 143 1⁄8", 155 1⁄8", or 167 1⁄8" to match your shop. A clear-floor design and a wide 109 3⁄4" drive-thru keep the bay open for tool carts and transmissions. Four 3-stage arms cover short and long wheelbases, while heavy-duty rubber pads with 2" pins and included 3" and 6" adapters help you hit the right contact points. Aero sync cables maintain carriage balance for smooth, even lifting.

Day-to-day reliability is baked in. UHMW polyethylene sliders and bronze bushings reduce wear and maintenance. A single-point manual safety lock release and automatic arm restraints add simple, mechanical confidence your techs will trust. The 2.0 HP, 220V single-phase power unit delivers a 69-second rise, so you stay on schedule. With a 5-3-2 factory warranty and clear installation requirements for concrete, power, and oil, the OH-12S is the practical commercial vehicle lift that just works.

If this model doesn’t work for you, see our complete lineup of 2-post lifts.

Side view of the AMGO OH-12S 12k two post lift

Benefits of the AMGO OH-12S Two Post Lift

Higher bay throughput | Faster rise and setups

Ceiling-friendly install | Fits 12–14 ft

Open floor workflow | No base plate

Confident heavy lifting | True 12K rating

Safer daily operation | Proven lock systems

Lower upkeep costs | Fewer wear items

Key Features of the AMGO OH-12S 2-Post Lift You'll Love:

12,000 lb capacity with dual direct-drive cylinders
This 12000 lb 2 post lift uses two direct-drive hydraulic cylinders, so there are no chains to stretch or maintain. Direct-drive gives you smoother motion and fewer moving parts to service over time. The result is predictable lifting on heavier trucks that keeps your schedule moving.
Three adjustable overall heights for 12–14 ft ceilings
Choose low, medium, or high settings at 143 1⁄8", 155 1⁄8", or 167 1⁄8" to match your building. This flexibility lets you maximize rise height without cutting or moving obstructions. It makes the OH-12S a fit for more shops, especially remodels where ceiling height varies bay to bay.
Safety systems your team can trust
A single-point manual safety lock release lets one tech lower from one column with confidence. The overhead safety shut-off bar protects roofs and racks, and aero sync cables keep both carriages level. Automatic arm restraints lock in position as you raise, which helps prevent arm drift during service.
Versatile reach with four 3-stage arms and included adapters
Four 3-stage arms let you hit compact and long-wheelbase lift points without awkward repositioning. Heavy-duty pads with 2" pins plus stackable 3" and 6" adapters help you dial in the right contact height. That means faster setups and fewer callbacks on tough chassis.

OH-12S measurements and specs chart, 12,000 lb

AMGO OH-12S 12,000 lb 2-Post Car Lift Specifications
Manufacturer	AMGO
Model	OH-12S
Product Type	Clear-floor two-post lift, adjustable height
Capacity	12,000 lbs
Lift Time	69 s
Max Lifting Height (pads only)	72 1⁄2" to 73 7⁄8"
Max Lifting Height (with adapters)	81 9⁄16" to 82 7⁄8"
Max Lock Height (pads)	70 9⁄16" to 71 7⁄8"
Max Lock Height (with adapters)	79 9⁄16" to 80 15⁄16"
Overall Height Settings	143 1⁄8" or 155 1⁄8" or 167 1⁄8"
Overall Width	150 3⁄4"
Drive-Thru Clearance	109 3⁄4"
Width Between Columns	123 1⁄2"
Min Pad Height	4 1⁄2"
Power Unit / Motor	2.0 HP, 220V, 60 Hz, 1-phase
Hydraulic System	Dual direct-drive cylinders, no chains
Safety Systems	Single-point lock release, overhead shut-off bar, automatic arm restraints, aero sync cables
Arm Type	Four 3-stage arms
Pad/Adapter Interface	2" pin, heavy-duty pads with 3" and 6" stackable adapters included
Sliders/Bushings	UHMW sliders with bronze bushings
Shipping Weight	2,202 lbs
Installation Height Guidance	For 12–14 ft ceilings; choose one of the three height settings
Concrete Requirement	Flat, sound slab ≥ 5" thick, ≥ 3,500 psi; no rebar in anchor zone; anchor torque 150 N·m
Electrical Requirement	220V single-phase, properly grounded; wiring by licensed electrician
Hydraulic Oil	ISO-46 anti-wear; initial fill, then replace yearly after first 3-month change
Included in Crate	Power unit, columns, overhead beam and limit bar, four 3-stage arms, pads, (4) 3" and (4) 6" adapters, anchor kit & shims, toe guards, tool trays, hardware
Options	Base-plate extension kit No. 21501
Warranty	Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. consumables), electrical, power units: 2 Years

Manual

Click to view the OH-12S Manual

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.