Bludee 1234yf AC Recovery & Recharge Machine | AC900

Name: Bludee 1234yf AC Recovery & Recharge Machine | AC900
Brand: Bludee
SKU: BDE-020-900
Price: 5995.00 USD
Availability: InStock

★★★★★ 4.8 (127 reviews)

Capacity 9,000 LB

Configuration Symmetric

Max Height 72"

Power 220V

$5995.00 $6495.00

In Stock

Qty:

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU	BDE-020-900
Brand	Bludee
Category	A/C Machine
Lift Capacity	9,000 lbs
Configuration	Symmetric
Maximum Lifting Height	72 inches
Minimum Ceiling Height	11 feet
Overall Width	140 inches
Overall Height	140 inches
Front Arm Design	3-stage telescoping with rubber pad adapters
Rear Arm Design	2-stage telescoping with rubber pad adapters
Power Requirements	220V, 60Hz, single-phase
Motor Power	2.2 HP
Safety Features	Single-point safety lock release, overhead safety shut-off bar
Lifting Time	50 seconds (floor to full height)
Certifications	ALI/ETL Certified
Warranty	1-year parts, lifetime structural
Shipping Weight	1,180 lbs
Country of Origin	China (manufactured to North American standards)

Designed for Real-World Workflows: Bludee HFO 1234yf Systems A/C Recovery Machine (AC900)

Buying a Bludee AC machine for HFO 1234yf work can feel risky because one mistake can waste expensive refrigerant, create comebacks, or leave you chasing “mystery” problems that end up being machine related. A lot of shops also get stuck babysitting slow recovery cycles or fighting weak vacuum performance that never really pulls moisture out. When that happens, recharge numbers look fine on paper, but the customer is back a week later with poor cooling. The Bludee AC900 is built to keep the process predictable so you’re not guessing your way through service. It’s designed for HFO 1234yf systems, with a fully automatic sequence that handles recovery, vacuum, leak test, and recharge in one flow. And with a stated 99% recovery efficiency, it’s aimed at reducing waste and tightening up consistency.

What makes this 1234yf AC Machine feel “shop-friendly” is that it’s made for walk-away workflows, not constant button pressing. You can run automatic recovery/recycling/recharge, then come back when it’s complete, which keeps bays moving. The AC900 uses a patented SRR (Supreme Recovery Rate) approach to hit over 99% recovery rate in short recovery time, plus it supports electronically controlled air purge to help prevent non condensables from building up in the tank. On the vacuum side, you’re working with a 120 L/min (32 gal/min) pump capacity, plus selectable evacuation time from 2 to 240 minutes and a vacuum leak test time from 0 to 30 minutes. It also includes an internal 10 kg (22 lb) refrigerant cylinder with heater, which helps support stable filling and charging.

If you’re servicing hybrids, EVs, or just a mixed fleet, oil handling is usually where things get annoying fast. The AC900 includes electronic oil injection with three separate 250 ml vessels (PAG, POE, UV) and a 400 ml used oil vessel, so you can keep oil management clean and track what was removed. It also comes with a built-in A/C capacity database for passenger vehicles (plus user input), an onboard electronic scale system, and a built-in thermal printer for quick job documentation. Charging speed is rated at 1 kg/min, and the machine is controlled through a 7 inch Android-based touch screen, which keeps the workflow straightforward for techs. Bottom line, it’s an AC recovery Machine that’s trying to remove the “babysitting” and reduce the chances of mistakes on 1234yf jobs.

Need a better fit? Check out our full range of A/C Machines.

Back side view of the Bludee 1234yf AC Recovery & Recharge Machine

Benefits of the Bludee AC900 1234yf A/C Machine

Faster 1234yf service | Run automatic cycles and keep bays moving.

Less refrigerant waste | High recovery efficiency helps reduce losses.

More consistent recharges | Accurate weighing supports repeatable charge amounts.

Cleaner oil handling | Separate PAG and POE injection reduces mix-ups.

Better comeback prevention | Vacuum control and leak test catch problems early.

Easier documentation | Built-in printer supports quick service records.

Key Features of the Bludee AC900 A/C Recovery Machine You'll Love:

Patented SRR high recovery performance: The AC900 uses a patented SRR (Supreme Recovery Rate) system designed to achieve over 99% recovery rate in a short recovery window. That matters because faster, higher recovery helps you avoid tying up a bay and helps reduce refrigerant waste on repeated services. In real shop terms, it’s built to keep recovery from being the slowest part of the job, especially when you’re stacked with appointments.
Strong vacuum control with leak-test options: Vacuum performance is backed by a 120 L/min (32 gal/min) vacuum pump capacity, with evacuation time selection from 2 to 240 minutes. You can also set a vacuum leak test time from 0 to 30 minutes, which helps catch obvious leaks before you dump refrigerant back in. This feature helps you avoid “charge it and hope” service, which is exactly how comebacks happen.
Fully automatic service flow (walk-away operation): This 1234yf AC Machine supports one-step automatic recovery, recycling, vacuum, and recharge, so you can start the cycle and come back when it’s done. It also supports manual functions when you want to run a specific step like tank fill or evacuation by itself. The biggest win is consistency, because the machine runs the same workflow the same way every time, even when the shop’s busy.
Clean oil management for standard and hybrid vehicles: Oil handling is built around electronic oil injection with three separate 250 ml vessels for PAG, POE, and UV, plus a 400 ml used oil vessel. This setup is especially useful when you service hybrids or electric vehicles where oil type matters, and mixing oils can cause headaches. It also helps techs track what oil was removed and put back in, instead of guessing and hoping it’s close enough.
Smart tank handling with internal cylinder, purge, and refill support: The machine includes an internal 10 kg (22 lb) refrigerant cylinder with heater, plus onboard electronic scales for accurate refrigerant management. It supports internal tank refill (manual or preset), so you’re not constantly stopping mid-service to deal with tank issues. Add electronically controlled air purge, and it’s built to reduce the chance of non-condensables building up and messing with performance over time.

AC900 1234yf AC Recovery & Recharge Machine being seen from the back side

Bludee AC900 HFO 1234yf Systems A/C Recovery Machine Specifications
Manufacturer	Bludee
Refrigerant Type	HFO 1234yf
Recovery Efficiency	99% (stated)
Power Supply	AC110V ±10%, 60Hz
Compressor Power	3/8 HP
Vacuum Pump Capacity	120 L/min (32 gal/min)
Evacuation Time Selection	2 to 240 minutes
Vacuum Leak Test Time Selection	0 to 30 minutes
Refrigerant Charging Speed	1 kg/min
Filter-Dryer Capacity	600 ml (spin-on style)
Refrigerant Cylinder Capacity	10 kg (with heater)
Cylinder Load Cell Accuracy	±10 g
Oil Load Cell Accuracy	±3 g (optional ±1 g with individual load cells)
New Oil Injection Vessels	3 separate vessels, 250 ml each (PAG, POE, UV)
Used Oil Vessel Capacity	400 ml
Maximum Working Pressure	20 bar
Display	7 inch touch screen, Android platform
Gauges Range (High Side)	-1 bar to 30 bar
Gauges Range (Low Side)	-1 bar to 16 bar
Additional Monitoring	Digitally displayed cylinder pressure and temperature
Vehicle A/C Database	Included, supports user database input
Air Purge	Electronically controlled
Thermal Printer	Built-in
Service Interval Monitoring	Electronically monitored and displayed
Flushing Function	Unidirectional or bi-directional, 10 to 60 minutes
Packaged Dimensions (Crate)	720 x 670 x 1170 mm (29 x 26 x 47 in)
Unpacked Dimensions	630 x 560 x 1075 mm (24 x 22 x 46 in)
Warranty	One year warranty, two years part and three years compressor

Video

Manual

Click to view the AC900 Manual

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.