Dragonfire Pro Series 24 Drawer 7FT Workbench | DFT-WB-24

Name: Dragonfire Pro Series 24 Drawer 7FT Workbench | DFT-WB-24
Brand: Dragonfire Tool Storage
SKU: DFT-WB-24
Price: 5199.00 USD
Availability: InStock

★★★★★ 4.8 (127 reviews)

Capacity 9,000 LB

Configuration Symmetric

Max Height 72"

Power 220V

$5199.00

In Stock

Qty:

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU	DFT-WB-24
Brand	Dragonfire Tool Storage
Category	Workbenches
Lift Capacity	9,000 lbs
Configuration	Symmetric
Maximum Lifting Height	72 inches
Minimum Ceiling Height	11 feet
Overall Width	140 inches
Overall Height	140 inches
Front Arm Design	3-stage telescoping with rubber pad adapters
Rear Arm Design	2-stage telescoping with rubber pad adapters
Power Requirements	220V, 60Hz, single-phase
Motor Power	2.2 HP
Safety Features	Single-point safety lock release, overhead safety shut-off bar
Lifting Time	50 seconds (floor to full height)
Certifications	ALI/ETL Certified
Warranty	1-year parts, lifetime structural
Shipping Weight	1,180 lbs
Country of Origin	China (manufactured to North American standards)

Stop Fighting Flimsy Slides, the Dragonfire Tools Pro Series DFT WB 24 Handles Heavy Drawer Loads

Buying a high-end workbench can be frustrating because a lot of “pro” benches look solid online, then show up with flimsy drawers, weak slides, and storage that doesn’t fit how you actually work. You also don’t want to gamble on stability when you’re loading heavy tools, because one bad drawer pull can turn into a messy safety issue fast. This bench solves those pain points with fully welded, reinforced steel drawers, serious slide capacity, and a built-in safety system that helps prevent tipping. On top, you get a 304 stainless steel wrapped wood worktop that’s built for daily abuse, not weekend projects. And with 24 drawers plus a 5,000 lb total load capacity, you’re getting real shop-grade storage, not decorative tool furniture.

The Dragonfire Tools Pro Series DFT-WB-24 is made for people who want their storage layout to match their workflow, not the other way around. The drawers are swappable, so you can configure the cabinet the way your tools need to be organized today, and adjust later when your setup changes. It’s built on a 14 gauge welded steel frame and weighs 860 lb, so it feels planted and steady once it’s in place. Overall size is 41-1/2" x 84-5/8" x 27-1/2" (with the removable backsplash installed), which gives you a true 7 ft footprint with deep, usable storage. You can choose Gunmetal Gray or Gloss Black powder coat, so it looks right in a clean shop or a busy workspace.

What really makes this dragonfire 7 ft workbench practical day-to-day is the way it combines storage, safety, and power in one station. Each drawer is fully welded steel with structural reinforcement, and rides on ball-bearing slides sized for the load, 200 lb for the shallow/medium drawers and 400 lb for the larger medium drawers. You also get rubberized drawer liners (1/8" thick) included, which keeps tools from skating around every time you open and close a drawer. Up top, the removable 4" backsplash includes integrated power, six 120VAC outlets, plus USB-C and USB-A ports for charging lights, meters, phones, and cordless tool batteries. If you’re trying to upgrade your dragonfire tool storage without piecing together a bench, a power strip, and extra cabinets, this is the all-in-one move.

If this machine isn’t for you, view the rest of our Workbenches.

Gray Dragonfire Pro Series 7ft workbench with 24 drawers and stainless backsplash DFT-WB-24

Benefits of the Dragonfire Pro Series 24 Drawer 7FT Workbench

Heavy-duty storage | Handles serious tool weight.

Custom drawer layout | Adjust as your setup changes.

Safer daily use | Anti-tilt reduces tip risk.

Clean charging setup | Power and USB built in.

Shop-grade work surface | Stainless top wipes down fast.

Confidence long-term | Limited Lifetime Warranty coverage.

Key Features of the Dragonfire Tools DFT-WB-24 Workbench You'll Love:

24 swappable drawer system (build your layout your way): The biggest win here is the swappable drawer layout, because your storage shouldn’t be locked into one factory setup forever. You can organize around your actual tool mix, like keeping daily hand tools up top and heavier equipment where it makes sense. Over time, if your workflow changes, you can reconfigure without replacing the whole bench, which is exactly what pro buyers want from dragonfire tool storage.
Fully welded, reinforced steel drawers with ball-bearing slides: Every drawer is fully welded steel and reinforced with structural ribs, so it holds shape under load and keeps sliding smoothly. The slide system is sized to the drawer type, supporting up to 200 lb or 400 lb, which is the difference between “pretty good” and “shop-ready.” You also get full extension, so you can actually reach everything in the back without digging around and wasting time.
Anti-tilt safety system that helps prevent tipping: When drawers get loaded with sockets, power tools, and hardware, opening multiple drawers at once can create a real stability risk. The anti-tilt system helps prevent that by allowing only one drawer to open at a time while the others lock automatically. That means you’re less likely to end up with uneven weight distribution and a sketchy tip situation, especially in busy shops where people move fast.
Pro-grade structure, 14-gauge welded frame, and serious weight: This bench is built on a 14-gauge welded steel frame, and at 860 lb, it’s made to stay put and feel stable under load. That weight matters when you’re yanking open heavy drawers or working on something that needs leverage. Combine that with the 5,000 lb total load capacity, and you get a dragonfire workbench that’s designed for long-term use, not a short-term upgrade.

Dragonfire DFT-WB-24 slide out top tray detail showing drawer rails stainless surface and outlet panel

Dragonfire Tools DFT-WB-24 Pro Series 24 Drawer 7FT Workbench Specifications
Manufacturer	Dragonfire Tools
SKU	DFT-WB-24
Finish Options	Gunmetal Gray or Gloss Black powder coat
Total Drawers	24
Shallow/Medium Drawer Quantity	16
Shallow/Medium Drawer Load Capacity	200 lb each
Shallow/Medium Drawer Size (H x W x D)	2-25/32" x 17-1/2" x 23-5/8"
Medium Drawer Quantity	8
Medium Drawer Load Capacity	400 lb each
Medium Drawer Size (H x W x D)	6-13/32" x 17-1/2" x 23-5/8"
Total Load Capacity	5,000 lb
Overall Dimensions (H x W x D, with removable backsplash)	41-1/2" x 84-5/8" x 27-1/2"
Worktop Material	304 stainless steel wrapped wood worktop
Frame Construction	14 gauge welded steel frame
Drawer Liners	1/8" thick rubberized liners included
Integrated Power (Backsplash)	6 x 120VAC/15A NEMA outlets
USB-C Ports	2 x 18W USB-C
USB-A Ports	2 x 18W USB-A
Product Weight	860 lb
Shipping Weight	1,092 lb
Warranty	Limited Lifetime Warranty

Video

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.