🚚 Free Shipping on All Orders | ↩️ 30-Day Returns | 🔒 Secure Checkout | FAQ

TOPDON · SKU: AD900BT

TOPDON ArtiDiag 7" Bluetooth Scan Tool w/Serv Functions & Bi-Directional | AD900BT

★★★★★ 4.8 (127 reviews)
Capacity 9,000 LB
Configuration Symmetric
Max Height 72"
Power 220V
$569.00 $659.00

In Stock

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU AD900BT
Brand TOPDON
Category Diagnostic Scanners
Lift Capacity 9,000 lbs
Configuration Symmetric
Maximum Lifting Height 72 inches
Minimum Ceiling Height 11 feet
Overall Width 140 inches
Overall Height 140 inches
Front Arm Design 3-stage telescoping with rubber pad adapters
Rear Arm Design 2-stage telescoping with rubber pad adapters
Power Requirements 220V, 60Hz, single-phase
Motor Power 2.2 HP
Safety Features Single-point safety lock release, overhead safety shut-off bar
Lifting Time 50 seconds (floor to full height)
Certifications ALI/ETL Certified
Warranty 1-year parts, lifetime structural
Shipping Weight 1,180 lbs
Country of Origin China (manufactured to North American standards)

Diagnose Faster and Work Freely with the TOPDON AD900BT Wireless Scan Tool

 

Buying a scan tool is frustrating because a lot of them look powerful on paper, then you find out they are wired only, slow, or limited to basic OBD2 codes. That’s usually when you waste time bouncing between menus, guessing at the right system, or getting stuck without the active tests you need. The AD900BT is built to fix those problems with full system coverage, fast hardware, and a wireless setup that’s actually practical in a real shop. You get a 7 inch touch display, AutoVIN for quick vehicle ID, and a Bluetooth VCI so you can move around the bay without being tethered. It’s the kind of tool that helps you diagnose faster and confirm the repair instead of just reading codes.

The TOPDON ArtiDiag is a Bluetooth OBD2 scanner and full system diagnostic scanner that covers 130 plus brands and supports 28 service functions. That means you can scan modules, read ECU info, clear DTCs, and review live data across the vehicle, not just the engine. It also supports FCA Gateway Access, which is a big deal if you work on Chrysler, Dodge, Jeep, and other FCA vehicles where access is often restricted. For troubleshooting, bidirectional control lets you command components like injectors, pumps, windows, and wipers so you can pinpoint whether the problem is the part or the control side. When you’re trying to be efficient, those active tests save real time.

It’s also built like a modern automotive diagnostic scanner tablet, not a laggy handheld. You’re getting a quad core 1.8GHz processor, 2GB RAM, 32GB storage, and a 6300mAh battery that’s rated up to about 11 hours, so it can keep up through a long day. The 7 inch LCD runs 1024 x 600, and the interface supports graphs plus up to four data streams at once for quick comparisons. Updates are included for 2 years, and the unit comes with a 1 year warranty. If you want a professional scan tool that’s wireless, covers a ton of vehicles, and still gives you advanced functions, the AD900BT checks the boxes without getting complicated.

 If this model isn’t a match, check our full Diagnostic Scanners collection.

Full system automotive diagnostics showing engine, ABS, airbag, TPMS, and ECU module coverage with TOPDON

Benefits of the TOPDON AD900BT 7 in Wireless Diagnostic Scanner

Cut diagnostic time | AutoVIN, fast hardware, and clear menus keep jobs moving.

Work wire free | Bluetooth VCI lets you diagnose anywhere around the vehicle.

Confirm the real fix | Bidirectional tests verify parts and systems before you replace anything.

Handle more services | 28 maintenance functions cover common shop procedures.

Expand module coverage | Full system scans across 130 plus brands catch deeper issues.

Stay current longer | Includes 2 years of updates for better long term value.

Key Features of the TOPDON AD900BT Diagnostic Scanner You'll Love:

  • Full system coverage for 130 plus vehicle brands: This advanced OBD2 scan tool is designed for full system diagnostics, not just generic engine code reading. You can pull module information, read and clear DTCs, and analyze data streams across multiple control units. That’s what you want when the issue is really in ABS, SRS, BCM, transmission, or another system that basic readers miss.
  • 28 advanced service functions for real maintenance work: With 28 service functions, you can handle the resets and maintenance procedures customers ask for constantly. Oil reset, SAS reset, brake reset, ABS bleeding, and DPF functions help you finish jobs correctly instead of sending the car out half done. It’s a solid fit for DIYers who want more capability and for shops that need a dependable service tool.
  • Bidirectional control for faster, more accurate troubleshooting: Bidirectional control lets you command components to verify operation and isolate faults quicker. Instead of guessing, you can trigger actuators and watch the system respond, which helps confirm whether a part is bad or the control signal is the issue. This is one of the biggest upgrades from a code reader to a professional scan tool.
  • ECU coding plus guided functions for supported platforms: The AD900BT supports ECU coding for VW, Audi, Skoda, Seat, Porsche, BMW, and Mini, which is useful for customization and certain replacement scenarios. You can enable features like single door unlocking, fuel display options, and other coding level changes depending on the vehicle. It also includes guided functions for VW and Skoda, which can make certain procedures more straightforward when the software provides a step by step path.
  • Faster hardware, clearer data, and easy reporting: A quad core 1.8GHz processor, 2GB RAM, and 32GB storage keeps menus responsive and helps scans load quickly. You can graph data and view up to four live streams at once, which makes it easier to compare sensors side by side and spot what’s off. The Health Report and report sharing tools help you document findings, clear codes quickly, and show customers exactly what you did.
TOPDON ArtiDiag900 BT diagnostic tablet with Bluetooth VCI and touchscreen interface for vehicle diagnostics

TOPDON AD900BT 7 in Wireless Diagnostic Scanner Specifications

Manufacturer TOPDON
Product Type Wireless automotive diagnostic tool (Bluetooth scan tool tablet)
Display 7 inch LCD
Display Resolution 1024 x 600 pixels
Operating System Android 8.1
Processor Quad core Cortex A53 MT6761, 1.8 GHz
RAM 2GB
Storage 32GB
Battery Capacity 6300mAh
Battery Life Up to 11 hours (rated)
Bluetooth Range Up to 10 meters (32.8 ft.)
Vehicle Coverage 130 plus brands
Diagnostics Full system
Service Functions 28
Bidirectional Control Yes
AutoVIN Yes
FCA Gateway Access Yes
Live Data Graphs, supports up to 4 data streams at once
ECU Coding VW, Audi, Skoda, Seat, Porsche, BMW, Mini
Guided Functions VW, Skoda
Software Updates 2 years included
Software Languages English, French, German, Spanish, Portuguese, Russian, Japanese, Italian, Korean, Arabic, Greek, Hungarian, Dutch, Polish, Slovak, Swedish, Danish, Chinese (traditional)
Working Voltage 5V
Working Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Dimensions (L x W x H) 9.37 x 5.71 x 1.69 inches
Weight 1.95 lb
Warranty 1 year
What’s In The Box ArtiDiag900BT tablet, Diagnostic VCI dongle, Type C to USB cable, 3 in 1 adapter, User manual, Quick start guide, Carry case
Manual

Click to view the AD900BT Manual

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.

📚

Expert Guides & Resources

📦

Browse the Full Category