AMGO 16,000 lb Alignment Scissor Lift | AX-16A

Name: AMGO 16,000 lb Alignment Scissor Lift | AX-16A
Brand: AMGO
SKU: AX-16A
Price: 16800.00 USD
Availability: InStock

★★★★★ 4.8 (127 reviews)

Capacity 9,000 LB

Configuration Symmetric

Max Height 72"

Power 220V

$16800.00 $18000.00

In Stock

Qty:

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU	AX-16A
Brand	AMGO
Category	Scissor Lift
Lift Capacity	9,000 lbs
Configuration	Symmetric
Maximum Lifting Height	72 inches
Minimum Ceiling Height	11 feet
Overall Width	140 inches
Overall Height	140 inches
Front Arm Design	3-stage telescoping with rubber pad adapters
Rear Arm Design	2-stage telescoping with rubber pad adapters
Power Requirements	220V, 60Hz, single-phase
Motor Power	2.2 HP
Safety Features	Single-point safety lock release, overhead safety shut-off bar
Lifting Time	50 seconds (floor to full height)
Certifications	ALI/ETL Certified
Warranty	1-year parts, lifetime structural
Shipping Weight	1,180 lbs
Country of Origin	China (manufactured to North American standards)

Stable & Alignment-Ready: AMGO AX-16A 16,000 lb Alignment Scissor Lift

Buying a heavy-duty alignment lift can feel risky. You need a platform that actually stays level, locks safely every time, and fits everything from sedans to long-wheelbase vans and trucks. The AMGO AX-16A solves those pain points with synchronized hydraulics, electro-air safety locks, and extra-wide, non-skid runways that keep vehicles planted. With a 16,000 lb capacity and a long 213 3/4" runway, it handles real shop work without flinching. If you’re searching for a vehicle scissor lift that’s stable, accurate, and easy to live with, this one checks the boxes.

Built for volume alignment and general service, the AX-16A uses four synchronized hydraulic cylinders to keep both runways level from floor to full rise. Max lift height is 72 13/16" with a 71 1/16" lock height, so techs get standing room and tool clearance. Alignment-ready details come baked in, including front turnplate recesses and rear slip balls for smooth toe and thrust adjustments. The overall width is 94 1/8" with 44 7/8" between runways, giving you breathing room for trucks and wide stances. Lifting time is about 110 seconds, which feels smooth and controlled rather than abrupt.

Wheelbase coverage is where this vehicle scissor lift shines. Four-wheel alignment support spans roughly 98" to 184 1/4", while two-wheel alignment stretch reaches about 190 9/16". Minimum height is just 13", so loading is easy, and the electro-air locks are simple to release when you’re ready to descend. Power comes from a 2.0 HP, 220V single-phase motor that’s proven in busy bays. Pair the lift with RJ-6A or RJ-6H 6,000 lb bridge jacks or step up to the RJ-8A 8,000 lb set to handle wheel-free work without moving the vehicle.

If this lift isn’t your style, browse our complete scissor lift lineup.

AMGO 16,000 lb Alignment Scissor Lift AX-16A with gray SUV raised on red runways and yellow ramps

Benefits of the AMGO AX-16A Alignment Scissor Lift

Faster alignments | Level runways and built-in provisions

Safer work height | Positive mechanical locking

Broad vehicle fit | Car to long-wheelbase truck

Confident loading | Extra-wide, non-skid platforms

Wheel-free service | Add RJ-6 or RJ-8 bridge jacks

Lower downtime | Simple electro-air controls

Key Features of the AMGO AX-16A You'll Love:

Electro-air, dual-teeth safety locks
The mechanical locks engage automatically as you rise and release with a quick air trigger, so there’s no guesswork. Dual-teeth geometry adds bite and redundancy, giving you confident holds at working height. Techs get a simple, reliable routine that suits high-traffic shops using a commercial scissor lift.
Alignment-ready runways with slip balls and turnplate recesses
Rear slip balls let the wheels move freely during toe and thrust angle adjustments. Front recesses accept standard turnplates, so you’re not improvising with adapters. With four-wheel coverage from about 98" to 184 1/4" and two-wheel up to about 190 9/16", the AX-16A fits everything from cars to long-wheelbase work vans.
Heavy-duty X-scissor structure
Large tubes and bracing give the scissor stacks the rigidity needed for 16,000 lb duty cycles. The design resists twist under asymmetric loads, keeping geometry true for accurate readings. Longevity improves too, which lowers total cost of ownership for shops planning long service lives.
Clean bay routing with pull-out tool shelf
Air and oil lines are neatly routed to reduce trip hazards and snags. A pull-out shelf gives techs a handy place for targets, heads, and hand tools while they work. Less clutter means faster steps, fewer misplaced parts, and better throughput on every alignment scissor lift session.

AMGO AX-16A Alignment Scissor Lift technical diagram showing side and top view with detailed measurements

AMGO AX-16A 16,000 lb Alignment Scissor Lift Specifications
Manufacturer	AMGO
Model	AX-16A
Lift Type	Alignment scissor lift
Capacity	16,000 lbs
Lifting Time	~110 s
Max Lift Height	72 13/16"
Max Lock Height	71 1/16"
Minimum Height	13"
Runway Length (B)	213 3/4"
Overall Width (C)	94 1/8"
Width Between Runways (D)	44 7/8"
Overall Length incl. ramps (E)	274 3/16"
Min Four-Wheel Alignment WB (F)	98"
Max Four-Wheel Alignment WB (G)	184 1/4"
Max Two-Wheel Alignment WB (H)	190 9/16"
Motor	2.0 HP
Power Requirement	220V, single-phase
Gross Weight	6,371 lbs
Runway Surface	Extra-wide, non-skid diamond plates
Safety Locks	Electro-air, dual-teeth, air-released
Hydraulics	Four synchronized cylinders
Alignment Provisions	Front turnplate recesses, rear slip balls
Compatible Rolling Jacks	RJ-6A / RJ-6H (6,000 lb), RJ-8A (8,000 lb)
Popular Add-Ons	Turnplates 40101, LED under-car lights PX010, Platform extensions PX003
Packing Dimension (Main)	218 1/2" x 30 5/16" x 41 1/8"
Packing Dimension (Control Cabinet)	18 13/16" x 16 7/8" x 49 3/16"
Warranty	Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. consumables), electrical, power units: 2 Years

Manual

Click to view the AX-16A Manual

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.