AMGO ALI Certified 10,000 lb 2-Post Lift - Super Asymmetric | OH-10

Name: AMGO ALI Certified 10,000 lb 2-Post Lift - Super Asymmetric | OH-10
Brand: AMGO
SKU: OH-10
Price: 4395.00 USD
Availability: InStock

★★★★★ 4.8 (127 reviews)

Capacity 9,000 LB

Configuration Symmetric

Max Height 72"

Power 220V

$4395.00 $4750.00

In Stock

Qty:

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU	OH-10
Brand	AMGO
Category	2-Post Lift
Lift Capacity	9,000 lbs
Configuration	Symmetric
Maximum Lifting Height	72 inches
Minimum Ceiling Height	11 feet
Overall Width	140 inches
Overall Height	140 inches
Front Arm Design	3-stage telescoping with rubber pad adapters
Rear Arm Design	2-stage telescoping with rubber pad adapters
Power Requirements	220V, 60Hz, single-phase
Motor Power	2.2 HP
Safety Features	Single-point safety lock release, overhead safety shut-off bar
Lifting Time	50 seconds (floor to full height)
Certifications	ALI/ETL Certified
Warranty	1-year parts, lifetime structural
Shipping Weight	1,180 lbs
Country of Origin	China (manufactured to North American standards)

AMGO OH-10 ALI Certified 10,000 lb 2-Post Clear-Floor Lift (Super Asymmetric)

Buying a lift can feel risky when you are not sure it will fit your bay, reach your lift points, or stand up to daily use. Ceiling height and door swing are common worries, along with concrete requirements and electrical specs that are easy to miss. The OH-10 addresses those pain points with a clear-floor design, adjustable column height at 142-1/2 inches or 150-1/2 inches, and Super Asymmetric arms that protect doors while loading. You also get a wide 99-1/2 inch drive-thru plus ~112-1/4 inches between columns for everyday sedans, SUVs, and light trucks. If you want a dependable 2 Post Lift that installs cleanly and works the way a real shop expects, this model is built for it.

Power, speed, and safety matter when your lift runs all day. Dual direct-drive cylinders eliminate chains and reduce wear while delivering a smooth ~56–57 second rise to 71-1/2 inches. The overhead shut-off keeps roofs and antennas safe, and the single-point manual lock release lets you disengage both columns from one side. UHMW sliders and bronze bushings keep column travel quiet and consistent under a 10,000 lb rated load. With a 3-1/2 inch minimum pad height and stackable 1.5, 2.5, and 5 inch adapters, you can hit tricky lift points without drama.

Install is straightforward when the site is dialed in. Plan for 220V single-phase power at 20A on a dedicated, grounded circuit. Concrete needs to be 4 inches thick at 3,000 psi minimum, cured at least 15 days, level within 3/8 inch, and anchored with 3/4 x 5-1/2 inch wedges torqued to roughly 150 N·m. The lift ships with tool trays, toe guards, anchors, and aero sync cables to simplify setup and operation. For shops searching for an ALI Certified two post lift that balances safety, speed, and serviceability, the OH-10 checks every box.

Need a better fit? Check out our full range of 2-post lifts.

AMGO OH-10 ALI certified 10k two post lift

Benefits of the AMGO OH-10 Two Post Lift

Faster turnarounds | ~56–57 second rise

Door-safe loading | Super Asymmetric arms

Clear bay workflow | No floor obstructions

Confident installs | Defined site specs

Lower maintenance | Fewer wear parts

Broad vehicle fit | 10,000 lb rating

Key Features of the AMGO OH-10 2-Post Lift You'll Love:

Direct-Drive Hydraulics (No Chains)
Direct-drive cylinders move the carriage without the added complexity of chains, which cuts down on wear parts and routine replacement. You get smoother lifting and fewer points of failure under a full 10,000 lb load. Over the life of the lift, that means less maintenance time and more billable hours on the floor.
Super Asymmetric Arms for Real-World Loading
The Super Asymmetric design lets you load vehicles symmetrically or asymmetrically to improve door clearance and access. Techs can open doors wider, position lift points accurately, and move faster around the bay. It’s a practical advantage for a 2 post vehicle lift that sees everything from compact sedans to light-duty trucks.
Single-Point Safety Lock Release
Unlock both columns from one side to save steps and reduce turn time between jobs. The mechanical locks hold securely at multiple positions, and the overhead shut-off protects tall vehicles as they rise. Together, these systems deliver confidence, repeatability, and safer workflows all day long.
Low Pad Height and Stackable Adapters
With a 3-1/2 inch minimum pad height, you can get under lower vehicles without resorting to homemade cribbing. The included 1.5, 2.5, and 5 inch pads help you level lift points and reach challenging frames safely. That flexibility keeps inspection time down and lift-point contact solid.

OH-10 two post lift measurements and specs table, 10,000 lb

AMGO OH-10 10,000 lb 2-Post Car Lift Specifications
Manufacturer	AMGO
Model	OH-10
Certification	ALI Certified two post lift
Capacity	10,000 lb (4,500 kg)
Lift Type	Clear-floor, dual direct-drive 2 post car lift
Arm Design	Super Asymmetric (symmetric or asymmetric loading)
Rise Height (no adapters)	71-1/2 in
Lock Height (no adapters)	69-1/2 in
Rise Height (with adapters)	80-9/16 in
Lock Height (with adapters)	78-1/2 in
Minimum Pad Height	3-1/2 in
Overall Height Settings	142-1/2 in or 150-1/2 in
Overall Width	135 in
Width Between Columns	112-1/4 in
Drive-Thru Clearance	99-1/2 in
Power Unit	2.0 HP, 220V, 60 Hz, 20A, single phase
Hydraulic Pressure (max)	~3045 psi (21 MPa)
Lifting Time	~56–57 s
Weight	1650 lb
Safety Systems	Single-point manual lock release, overhead shut-off, toe guards
Sliders/Bushings	UHMW self-lubricating sliders, bronze bushings
Synchronization	Aero cable synchronization
Included Adapters	Stackable rubber pads: 1.5 in, 2.5 in, 5 in
Included Hardware	Anchors, overhead bar with limit switch, tool trays, hardware kit
Concrete Requirement	4 in thickness, 3,000 psi, cured ≥15 days, ≤3/8 in level variation
Anchor Spec	3/4 x 5-1/2 in wedge anchors, ~150 N·m re-torque monthly
Electrical Requirement	Dedicated grounded 220V/60Hz/20A circuit, indoor use
Shipping Dimensions	Length: 2800 mm (110") Width: 450 mm (17.7") Height: 825 mm (32.5")
Warranty	Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. consumables), electrical, power units: 2 Years

Manual

Click to view the OH-10 Manual

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.