🚚 Free Shipping on All Orders | ↩️ 30-Day Returns | 🔒 Secure Checkout | FAQ

AMGO · SKU: OH-12

AMGO Commercial 12,000 lb 2-Post Lift | OH-12

★★★★★ 4.8 (127 reviews)
Capacity 9,000 LB
Configuration Symmetric
Max Height 72"
Power 220V
$4950.00 $5750.00

In Stock

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU OH-12
Brand AMGO
Category 2-Post Lift
Lift Capacity 9,000 lbs
Configuration Symmetric
Maximum Lifting Height 72 inches
Minimum Ceiling Height 11 feet
Overall Width 140 inches
Overall Height 140 inches
Front Arm Design 3-stage telescoping with rubber pad adapters
Rear Arm Design 2-stage telescoping with rubber pad adapters
Power Requirements 220V, 60Hz, single-phase
Motor Power 2.2 HP
Safety Features Single-point safety lock release, overhead safety shut-off bar
Lifting Time 50 seconds (floor to full height)
Certifications ALI/ETL Certified
Warranty 1-year parts, lifetime structural
Shipping Weight 1,180 lbs
Country of Origin China (manufactured to North American standards)

The AMGO OH-12 2 Post Lift: Built for Commercial Power and Everyday Reliability

 

Buying a lift can feel risky when you’re worried about ceiling height, door swing, and whether the arms will actually reach your lift points. If you run a busy shop, you also need predictable safety locks, real under-car clearance for trucks and vans, and a clear floor that keeps jacks and creepers moving. The AMGO OH-12 solves those pain points with a 12,000 lb capacity, dual direct-drive hydraulics, and an overhead limit switch that protects taller vehicles. Three selectable overall heights — 174 in, 186 in, or 198 in — make it easier to match buildings with 14.5 to 16.5 ft ceilings. With a quick rise time of about 69 seconds and a minimum pad height of 4.5 in, it’s built for real-world bays that see everything from low cars to commercial pickups.

This model gives you space where it counts. Maximum lifting height is roughly 72.5 to 73.9 in on pads only, or about 81.6 to 82.9 in with adapters, which means comfortable standing room for most techs. A wide 150.75 in overall width with 123.5 in between columns creates a roomy work area, and the 109.75 in drive-thru clearance helps keep traffic moving. Four 3-stage arms reach short wheelbase cars and longer trucks without awkward repositioning. The result is a consistent workflow, fewer re-spots, and less time lost to setup.

You also get pro-grade touches that cut maintenance and protect uptime. The OH-12’s single-point safety lock release lets you unlock both columns from one side. Self-lubricating UHMW sliders and bronze bushings keep motion smooth and service intervals simple. Standard hardware includes heavy-duty round pads, saddle adapters, plus 3 in and 6 in extensions, so you can set height quickly for SUVs, trucks, or commercial vans. If you’re searching for a dependable 2 Post Lift, the AMGO OH-12 is a smart, future-proof pick for commercial bays that need a true 2 Post Lift with commercial capacity.

Looking for another option? Browse all our 2-post lifts now.

AMGO OH-12 12k two post lift raising camper

Benefits of the AMGO OH-12 Two Post Lift

Faster bay turns | Reduce re-spots and setup time.

Real height flexibility | Match 14.5 to 16.5 ft ceilings.

Confident vehicle protection | Overhead shut-off for tall roofs.

Lower maintenance load | No chains and self-lubricating guides.

True mixed-fleet coverage | Cars, SUVs, and pickups.

Professional uptime | Simple inspections and quick parts access.

Key Features of the AMGO OH-12 2-Post Lift You'll Love:

  • Direct-drive dual hydraulic cylinders (no chains)
    Direct-drive delivers smooth lifting without the chain maintenance that slows shops down. Fewer wear points mean fewer adjustments and less downtime across busy weeks. You get consistent performance that helps techs trust the lift at every stop height.
  • Four 3-stage arms for real coverage
    All four arms telescope through three stages to handle compact cars, full-size SUVs, and commercial pickups. This range lets you choose symmetric or asymmetric approaches as your jobs demand. Result: fewer re-spots and faster bay turns on mixed fleets.
  • Three selectable column heights with overhead safety shut-off
    Pick 174 in, 186 in, or 198 in overall height to match 14.5 to 16.5 ft ceilings. The overhead bar integrates a limit switch that protects tall roofs and roof racks from accidental contact. You get flexibility during install and peace of mind during daily use.
  • Single-point lock release with automatic arm restraints
    Unlock both columns from one side to speed transitions between lock positions. Automatic arm restraints engage during lift to help keep arms locked where you set them. Together, they support predictable safety and reduce unintended arm drift.
OH-12 two post lift measurements and specs, 12,000 lb

AMGO OH-12 12,000 lb 2-Post Car Lift Specifications

Manufacturer AMGO
Capacity 12,000 lb
Lift Time ~69 seconds
Max Lift Height — Pads Only 72.5 to 73.9 in (approx)
Max Lift Height — With Adapters 81.6 to 82.9 in (approx)
Max Lock Height — Pads Only 70.6 to 71.9 in (approx)
Max Lock Height — With Adapters 79.6 to 80.9 in (approx)
Overall Height Settings 174 in, 186 in, 198 in
Overall Width 150.75 in
Width Between Columns 123.5 in
Drive-Thru Clearance 109.75 in
Minimum Pad Height 4.5 in
Power Unit 2.0 HP hydraulic power unit
Electrical 220 V, 60 Hz, single-phase
Gross Weight 2,346 lb
Safety Systems Single-point lock release, automatic arm restraints, overhead safety shut-off
Arm Configuration 4 arms — all 3-stage
Included Adapters Heavy-duty round pads, saddle adapters, 3 in and 6 in extensions
Sliding/Bushings Self-lubricating UHMW sliders with bronze bushings
Concrete Requirement 5 in thick, 3,500 psi, sound and level (indoor only)
Minimum Ceiling Guidance Choose column height to suit; 174 in overall requires about 14.5 ft clear ceiling
Warranty Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years
Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years
Other Parts (excl. consumables), electrical, power units: 2 Years
Manual

Click to view the OH-12 Manual

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.

📚

Expert Guides & Resources

📦

Browse the Full Category