Katool 2 Post Vehicle Lift - 14,000lb Capacity | KT-M140XD

Name: Katool 2 Post Vehicle Lift - 14,000lb Capacity | KT-M140XD
Brand: KATOOL
SKU: KT-M140XD
Price: 3699.00 USD
Availability: InStock

★★★★★ 4.8 (127 reviews)

Capacity 9,000 LB

Configuration Symmetric

Max Height 72"

Power 220V

$3699.00 $4199.00

In Stock

Qty:

📦 Free Shipping to United States ↩️ 30-Day Returns 🔒 Secure Checkout ✓ Authorized Dealer 📞 Expert Support

Technical Specifications

SKU	KT-M140XD
Brand	KATOOL
Category	2-Post Lift
Lift Capacity	9,000 lbs
Configuration	Symmetric
Maximum Lifting Height	72 inches
Minimum Ceiling Height	11 feet
Overall Width	140 inches
Overall Height	140 inches
Front Arm Design	3-stage telescoping with rubber pad adapters
Rear Arm Design	2-stage telescoping with rubber pad adapters
Power Requirements	220V, 60Hz, single-phase
Motor Power	2.2 HP
Safety Features	Single-point safety lock release, overhead safety shut-off bar
Lifting Time	50 seconds (floor to full height)
Certifications	ALI/ETL Certified
Warranty	1-year parts, lifetime structural
Shipping Weight	1,180 lbs
Country of Origin	China (manufactured to North American standards)

Built for Real Shops: Katool KT-M140XD 14,000 lb 2-Post Lift That Balances Power, Fit, and Uptime

Shopping for a heavy-duty 2 post lift can feel risky when you’re worried about fit, safety, and uptime. You need a lift that clears your ceiling lights, fits your bay width, and won’t bog down your workflow. The Katool KT-M140XD is designed to solve those headaches with a 14,000 lb capacity, generous drive-through width, and straightforward controls. Its low pad height helps with low-profile vehicles while still handling larger SUVs and work trucks. If you’ve been comparing spec sheets and second-guessing installation requirements, this model gives you clean, confident answers.

In daily use, techs want a 2 post car lift that feels stable, lifts quickly, and stays quiet enough to hold a conversation. Dual hydraulic cylinders, mechanical safety locks, and equalization cables deliver smooth, level lifting you can trust. Rise times up to 50 seconds keep throughput moving, and typical operating noise stays at or below 75 dB to cut shop fatigue. The overhead cross beam includes a top limit switch to protect tall roofs and racks. Simple, manual-release lowering gives you predictable control even during power hiccups.

Planning is easier too. Ceiling height is the big one, and this lift stands about 166.73 inches overall, so measure with clearance for lights and sprinklers. Bay planning is helped by the 157.87 inch overall width and 133.46 inch drive-through width. Site requirements are clear: indoor use on level, 3,000-PSI concrete, with new slabs cured for 28 days and a recommended thickness around 5.9 inches. Multiple motor options cover common single- and three-phase power scenarios. If you’re building out a professional bay or adding capacity, this is a capable Commercial vehicle lift that won’t box you in.

Looking for more variety? Explore our complete 2-post lift selection.

viewing the M140XD 2 post lift buy katool from the front

Benefits of the Katool KT-M140XD Two Post Lift

Bigger vehicle coverage | Serve trucks and SUVs

Faster workflow | Keep bays turning

Confident lifting | Smooth, level raising

Safer overhead clearance | Limit switch protection

Low-profile access | Easy pickup points

Flexible power options | Match your shop

Key Features of the Katool KT-M140XD You'll Love:

Heavy 14,000 lb capacity with symmetric geometry
This 14000 lb 2 post lift handles full-size trucks, vans, and loaded service vehicles without drama. Symmetric arms center the mass between posts for a planted, predictable feel. That balance translates to smoother lifting and less rocking, which keeps techs confident and productive.
Overhead cross beam with top limit switch
The overhead design gives you wide floor access and includes an upper limit switch to help prevent roof or rack contact. That safeguard reduces oops-moments with tall cargo boxes and ladders. Fewer near-misses mean fewer interruptions and less rework.
Dual hydraulic cylinders with equalization cables
Two cylinders power clean, even lifting, while steel equalization cables keep carriages in sync. The setup helps the vehicle stay level as weight shifts during service. It also builds in redundancy so you’re lifting with confidence every cycle.
Low 4.33 in pad height for low-profile access
At roughly 110 mm minimum pad height, you can pick up lower chassis vehicles without elaborate ramp tricks. That’s a time saver for mixed-fleet shops working on sedans in the morning and trucks in the afternoon. Add stacking adapters as needed to reach OEM lift points without compromising clearance.

Katool KT-M140XD 14,000 lb 2-Post Lift Specifications
Manufacturer	Katool
Model	KT-M140XD
Lift Type	Symmetric 2-post with overhead cross beam
Capacity	14,000 lb
Lifting Height	72.83 in (1800 mm)
Rise Time	≤ 50 s
Lowering Time	20–50 s
Minimum Pad Height	4.33 in (110 mm)
Noise	≤ 75 dB(A)
Net Weight	1,807 lb
Overall Height	166.73 in (4235 mm)
Overall Width	157.87 in (4010 mm)
Drive-Through Width	133.46 in (2990 mm)
Power Unit Options	220V/60HZ/1PH
Environment	Indoor use only
Operating Temperature	−5°C to +40°C (typical operation ~41–104°F)
Floor Requirements	Level concrete, 3,000-PSI minimum, ~5.9 in recommended thickness, slope ≤3°, new slabs cure 28 days
Warranty	12 months parts; 36 months structural components

Manual

Click to view the KT-M140XD Manual

Built for the serious home garage enthusiast and light commercial shop, the Atlas Garage Pro delivers professional-grade lifting performance at an accessible price point. This 9,000 lb capacity symmetric two-post lift is engineered with precision-machined components and industrial-grade hydraulics that ensure decades of reliable service.

The symmetric arm configuration provides optimal weight distribution for most passenger vehicles, light trucks, and SUVs. Three-stage telescoping front arms and two-stage rear arms give you maximum reach flexibility, while the included rubber pad adapters protect vehicle frame rails and pinch welds from damage during lifting operations.

Safety is paramount in professional lifting equipment. The Atlas Garage Pro features a single-point safety lock release system that allows for controlled, gradual lowering — eliminating the risk of sudden drops. The overhead safety shut-off bar provides automatic power cutoff if the lift reaches maximum height, preventing over-extension damage to the hydraulic system.

Installation requires a minimum 11-foot ceiling height and adequate floor reinforcement (4-inch minimum concrete thickness recommended). The lift operates on standard 220V single-phase power, making it compatible with most residential and commercial electrical systems without requiring costly three-phase upgrades.

Each Atlas Garage Pro ships with all necessary installation hardware, detailed assembly instructions, and access to our technical support team. Professional installation is recommended to ensure proper anchoring and safety compliance.